Cover Story

The oldest and simplest way of treating light is in terms of geometrical optics, and, over the centuries, it has sufficed to explain most practical applications. Perhaps the first systematic and intensive studies were conducted by the... more>>

Features

OSA part of national standards writing effort

The Optical Society's Engineering Council is taking an increasing interest in optical standards. A recent report prepared for the Council suggests, among other things, that a national group concerned with optical standards be established to review and write domestic optical standards. The report also recommends that this group be a member of ANSI. more>>


An engineering achievement: The first transoceanic lightwave system

After a decade of intensive design and engineering on an international scale, the world's first transoceanic lightwave system was initiated between Europe and North America last December by AT&T, British Telecom, and France Telecom. The system represents the first link in the Worldwide Intelligent Network that will connect the telecommunications networks of Europe and North America with the Far East. This system— known as TAT-8, since it is the eighth transatlantic telecommunications cable system—represents both the culmination of the hard and focused efforts of scientists and engineers from many disciplines, as well as just the beginning of an era in international telecommunications that will offer new and exciting opportunities for lightwave technology. more>>


Materials for nonlinear optical waveguides

Low power nonlinear optics opens up a wide range of applications for the generation of new frequencies and the control of light by light. By using light-guides, the typical optical powers required for nonlinear optical devices are in the 100 mW -- 100 W range. The problem is that even this four orders of magnitude improvement over bulk nonlinear optics is not enough for most upcoming applications that will be based on semiconductor lasers. To reduce nonlinear optical powers to the 1 -- 100 mW range requires new materials. more>>